Concrete Testing Equipments

Our company is engaged in manufacturing and supplying Flow Table & Kelly Ball Penetration Apparatus, which are used to determine the workability of portland cement concrete. The Kelly Ball test is considered to be simple and much faster than the slump test.

ASEW-134

• Flow Table : IS : 1199, AASHTOT 126, BS 4551-1,ASTMC230
• The Flow Table determining the flow or Portland cement concrete Consists of Flow table hand Top is 76.2 cms (30") dia, finely machined from a solid casting.
• The stand is fabricated out of cast iron/M. steel and is of sturdy construction.
• The ground and hardened steel cam is designed to drop the table by 12.5mm.
• Complete with Flow mould with handles with one tamping rod 0-60 cms long x 16 mm dia. Hand operated.

ASEW-135

• Flow Table, Motorised.
• Similar to item No. 134, but electrically operated. Suitable for Operation on 230 Volts, single phase, 50cycle. A.C. supply.

Spares:

• Flow Mould made of gunmetal, IS: 1199
• Tamping Bar.

ASEW-136

• Kelly ball penetration apparatus ASTM C-30.
• The apparatus is Complete with a steel cylinder with hemispherical bottom and Handle and the strirrup frame.

We are offering Cylindrical Density Measuring Apparatus, which are basically density measuring apparatus disclosed including a section of cylindrical conduit comprising a measurement section or housing for the flow sensor. The flow sensor housing is fixedly attached to a conduit at its distal ends allowing fluid to pass through the open ends of the sensor housing as fluid flows through the conduits.

Weight per Cubic Meter Of Fresh Concrete
ASEW-137

• Bulk Density Cylindrical Measure, 0.01 cu. M (10 ltr.) nominal Capacity with handles. IS : 1199.

ASEW-138

• Bulk Density cylindrical measure, 0.02 cu. M (20 ltrs.) nominal Capacity with handles. IS: 1199.
• Compaction Factor apparatus: IS : 5515 ; IS : 1199,BS 1881-103,BS 5075
• Consists of two conical hoppers and a cylinder mounted on a rigid metal frame. The lower opening of the hoppers are fitted with hinged trap-doors for release and during the fall of material. Complete with trowel and tamping bar 0-60 cms long x 16 mm dia. Ifca

ASEW-140

• Concrete Penetrometer, Spring type. IS: 8142, ASTMD 1558.
• Consists of cylindrical spring housing with a plunger attached to the top of the spring. Penetration needle is attached to the other end of the spring housing. The plunger is graduated in 1 kg/div, to a maximum cap of 60 kg. Which can be read with respect to the top end of the spring housing. Complete with a set of seven needle pointers in a nice wooden carrying case.

Our Air Entrainment Meters are equipped with pressure tight flanged cylindrical measuring bowl Fitted with a removable flanged conical cover assembly with a seal in between. These are complete with a pressure bulb or air pump, calibrating cylinder, pressure gauge, funnel, trowel and tamping bar.

ASEW-141 A Type

• Air Entrainment Meter, IS: 1199, IS: 9799,BS 1881-106,ASTMC231.
• Consists of a pressure tight flanged cylindrical measuring bowl Fitted fitted with a removable flanged conical cover assembly With a seal in between. Conical cover has an air valve and a Pet cock for bleeding off the water. A cylindrical stand pipe, Which is graduated in air content, is fixed to the conical cover assembly. The whole assembly is mounted on a flat base. Each apparatus is supplied complete with a pressure bulb or Air pump, calibrating cylinder, pressure gauge, funnel, trowel and tamping bar.
• Air Entrainment meter 0.005 cu. Mt.(5 litre) For maximum size Aggregate 38 mm. Complete with Pressure bulb/hand pump, tamping bar, Rubber mallet, Straight edge.
• Air Entrainment meter 0.001 cu. Mt (10 litre) for maximum size aggregate 75 mm. Complete with Pressure hand pump, tamping bar, Rubber mallet, Straight edge.

ASEW-141 B Type

• Air Entrainment Meter, IS: 1199, IS: 9799,BS 1881-106,ASTMC231.
• Consists of a pressure tight flanged cylindrical measuring bowl Fitted fitted with a removable flanged conical cover assembly With a seal in between. Conical cover has an air valve and a Pet cock for bleeding off the water. A cylindrical stand pipe, Which is graduated in air content, is fixed to the conical cover assembly. The whole assembly is mounted on a flat base. Each apparatus is supplied complete with a pressure bulb or Air pump, calibrating cylinder, pressure gauge, funnel, trowel and tamping bar.
• Air Entrainment meter 0.005 cu. Mt.(5 litre) For maximum size Aggregate 38 mm. Complete with Pressure bulb/hand pump, tamping bar, Rubber mallet, Straight edge.
• Air Entrainment meter 0.001 cu. Mt (10 litre) for maximum size aggregate 75 mm. Complete with Pressure hand pump, tamping bar, Rubber mallet, Straight edge.

Our range of Longitudinal Compressometer & Lateral Extensometer is equipped with two frames for clamping to the specimen by means of five tightening screw with a hardened and tapered end. These are catering to the requirements of diverse applications in defense, automotives and research and development activities.

Determination of The Modulus Of Elasticity
ASEW-142

• Longitudinal Compressometer for 150mm dia x 300 mm high Specimen
• Consists of two frames for clamping to the specimen by means of five tightening screw with a hardened and tapered end. Two spacers hold the two frame in position. A pivot rod rests on pivot screws. A dial gauge, fixed to a bracket fitted to the top frame is used for taking deformation measurement. Supplied complete with dial gauge 0.002 mm x 10 mm in a nice wooden carrying case.

ASEW-143

• Lateral Extensometer for 150 mm dia x 300 mm high specimen:
• Consists of two movable frames pivoted at one end. A dial gauge Measures the lateral extension, and a removable spacer strip is For the initial setting of the dial gauge. Complete with a dial gauge 0.01 x 25 mm and stainless steel screws.

We are offering Specific Gravity (Density) Apparatus, which is useful in the determination of specific gravity of a test liquid by the falling-drop method is described. This feature enables the initial fluid column to be conveniently repetitively used for specific gravity determinations.

Density of Fresh and Hardened Concrete
ASEW-144

• Specific Gravity (Density) apparatus, BS: 1881-114./Buoyancy Balance.
• Consists of a rigid support frame, incorporating a water tank mounted on a platform. A mechanical lifting device is used to raise the water tank through the frame height immersing the specimen suspended below the balance. The Electronic Digital Balance 10 kg x 0.5 gram supplied with frame, water tank, suspension hook, Wire basket 200x200 mm.

We design light weight concrete meters to remove the burden some works of hand mixing. Uniform mixed batches can be obtained in the filed or laboratories. The counter balance-mixing drum can be easily tilted. The total drum volume is two cubic feet. This drum is mounted on a sturdy rubber tired stand. Drum is mounted for end discharge. These are equipped with end towing poles. The stable power consumption of these mixtures is 440 V, 3 phase, 50 cycle AC Supply.